How To Draw A Chinese Dragon Head Step By Step Easy

Download Commodity

Download Article

Drawing a dragon is a great manner to show your creativity, but information technology may be challenging to draw the head because it has a lot of detail. Luckily, yous tin get-go sketching the head with bones shapes before calculation in the features. Fantasy dragons usually have pointier snouts and are the most common types in Western culture, while Chinese dragons have boxier heads. With a bit of do, you lot'll be able to describe whatever type of dragon head you want!

1
Depict a circumvolve in the centre of your paper. Apply a pencil and sketch your lines in lightly and then you're able to erase them easily. Make the circle in the center of the page, leaving room on each side of it so you have infinite to add together more features. The circle doesn't demand to be perfectly round, simply you lot may use a compass to aid you draw your lines if you want.^[i]
- The drawing of the dragon caput will be in profile view when you're finished.
- If you plan on adding the remainder of the dragon's body to your drawing, then make sure the circumvolve is small enough so you lot can fit the body on your sheet of paper.
- If you want your dragon to have a longer confront, then make a horizontal oval instead of a circle.
2
Add together a rounded trapezoid on the side of your circumvolve for the dragon'due south snout. Choose either the left or right side of the circle depending on which way yous desire the dragon head to confront. Describe the top horizontal line of the snout coming from the height of the circumvolve so it's the aforementioned length equally the circle'southward diameter. Make another horizontal line coming from the bottom of the circumvolve to make the lesser of the snout. Connect the two lines and so the corners are rounded.^[2]
- Yous can make the snout longer or shorter depending on how y'all want the dragon to look.
- Don't leave sharp corners on the end of the snout or else your dragon won't expect natural.
Advertisement
three
Make parallel lines coming out the bottom of the circumvolve for the dragon'due south neck. Start one of the lines where the bottom of the snout connects to the head. Brand a curved line coming downwardly from the head as long as you want information technology. Then draw some other curved line that's parallel to the offset one on the opposite side of the caput.^[3]
- The dragon'south neck commonly gets wider closer to its body, so you can make the lines get further apart near the bottom if you desire to.
Tip: Add a neck fifty-fifty if y'all don't plan on drawing the rest of the dragon'southward body. That way, the head will nonetheless have the illusion that it's continued to something.
iv
Sketch a curved horizontal line through the trapezoid to make a oral fissure. First drawing the mouth in the middle of the trapezoid's narrow end. Extend the line horizontally so it ends near the heart of the dragon'due south head. Bend the end of the mouth up if you desire your dragon to look like information technology's smiling, or angle it downwardly if you want it to frown.^[4]
- Put a parallel line underneath the oral cavity if you want it to look similar your dragon has a lesser lip.
5
Draw triangles coming out from the oral cavity to give your dragon teeth. Y'all can either add together teeth that point upwardly or downwards along your dragon'due south mouth. Choose anywhere along the mouth and depict a triangle that points upward or down starting from the oral cavity line. Add together 5-6 separate teeth in your dragon'due south mouth and so it looks more fearsome.^[5]
- Don't line the entire mouth with teeth or else your cartoon may start to look messy.
- You can have teeth pointing both upward and down.
half dozen
Put a circle or triangle higher up the oral cavity to brand an eye. Place the centre next to where the pinnacle of the snout connects to the side of the circle. If you want your dragon to expect more realistic, draw a pocket-size circle for the heart so at that place's a small gap betwixt it and the top of the snout. For a dragon that looks angrier, add a horizontal triangle so the point faces the snout.^[6]
- Don't make the heart likewise large or else you won't have room to add other features.
- Search for pictures of other reptiles to see what their eyes look like then you tin can use them as a reference.
vii
Add bumps and ridges on the elevation of the dragon's caput for more texture. Dragons don't accept smooth skin, and then their heads will look bumpy and knobby from their scales. Apply the outlines you lot currently take as guides and go over them to add together curves to the snout. Use wavy or zig-zag lines going from the cease of the snout toward the back of its head.^[vii]
- For example, you may add a large bump above the dragon'south eye if you want to give it a prominent forehead.
- You lot can add as many or equally few bumps and ridges to the dragon depending on how you want it to look.
8
Give your dragon horns if you want to. If you desire to add horns to your dragon, make a vertical line extending out from the height of the dragon's head. Extend the line out and then it's about the aforementioned length equally the snout. Add another line that starts on the back side of the dragon's head and connects to the end of the first line to complete the horn.^[8]
- Make the horn shorter if you want to make it seem like your dragon is younger.
- You can make the horns any shape you want. Look up horns on real animals to get influences for what y'all can include on your dragon.
- Y'all may besides choose to add horns or spikes running down the dorsum of the dragon's neck if you want to.
ix
Erase the lines y'all used as guides. Go over your drawing with an eraser and get rid of whatsoever lines that aren't notwithstanding a part of your dragon. For example, you may erase the circle or the original outline of the snout if you added more bumps to it. Continue erasing any guides or mistakes you made, and blow off the shavings when you lot're finished.^[ix]
- Darker lines volition be harder to erase than lightly sketched lines.
- Go a clickable detail eraser if yous need to erase lines in small areas. Yous tin get special erasers from an fine art store or online.
x
Add together details similar scales and nostrils to brand your dragon seem realistic. In one case you erase the guide lines, start adding the concluding details into your drawing. Start with small ovals or circles for the nostrils at the end of the snout. One time y'all add together the nostrils, draw in U-shaped lines on the sides of the dragon'due south head and down its neck requite the illusion of scales.^[10]
- You don't need to draw every scale on the dragon's confront since it could brand your drawing wait messy or unclear.
- Shade your drawing with a pencil or colored pencil if y'all want to add more perspective or colour.
11

Finished.

Advertisement

ane
Make a circle with a rounded rectangle for the dragon's head and snout. Start by making a circumvolve in the middle of your piece of paper and so you have room to add features on each side. Choose the right or left side of the circle to put the snout depending on what management you want the dragon to face. Start the rectangle halfway downwards from the top of the circumvolve and connect the bottom edge to the lowest signal of the circumvolve.^[11]
- You can choose to make the dragon's snout thicker if y'all desire.
- When you're finished, your dragon head will exist in profile view.
- Sketch your lines lightly at outset so you tin can easily erase them later on. Otherwise, you'll leave marks on the paper that yous tin can't become rid of.
2
Sketch in the dragon'southward neck coming out from the other side of the caput. Start a line at the point where the bottom of the snout touches the circle. Curve the line slightly down so information technology looks like it extends off of the page. Draw the top of the neck coming from the top side of the circumvolve so information technology'south parallel with the offset line y'all drew.^[12]
- While y'all don't have to draw the neck for your dragon, it adds to the illusion that the caput is continued to a trunk.
- Chinese dragons have long, snake-similar bodies, so the neck will stay the same thickness the entire time.
3
Draw a horizontal line and triangles to give your dragon a mouth and teeth. Get-go the line for the mouth so it's a third of the way up from the bottom of the rectangle. Make a slightly curved horizontal line that ends near the middle of the dragon'southward head. Draw modest triangles coming out from the height or bottom of the line to give the dragon sharp teeth.^[thirteen]
- Give your dragon a grin if you want information technology to await happy or a frown if y'all want it to announced more than tearing.
- Only add a few teeth to the mouth so the drawing doesn't look messy.
4
Add together a circumvolve or oval above the oral fissure for your dragon'south eye. Identify the centre for your dragon inside the circle so it'south next to where the top of the snout connects to the head. Make a circle or a horizontal oval for the center and so there'southward a minor gap between it and the peak of the head. Add together an angled line above the eye to give your dragon an angry brow.^[14]
- The dragon's pupil tin be round like a homo, or you can make it look like a slit, like to a serpent or true cat.
- Don't make the heart too large or else the dragon will expect unnatural and y'all won't have room to place the residue of the features.
five
Draw antlers or horns on top of your dragon's head. Chinese dragons usually have antlers that wait like a deer, but they can as well have standard spiked horns. If you lot want to add antlers, Draw a Y-shape coming out from the dorsum of the dragon's head. Add lines on either side of the Y-shape then the antler ends in curved points. If you lot want to make horns, depict a long triangle coming out from the back of the dragon's caput instead.^[15]
- You lot don't need to add antlers or horns at all if you don't want to.
half dozen
Sketch in ears underneath the antlers. Dissimilar many other dragons, Chinese dragons have ears on the sides of their head that look similar to cow or deer ears. Depict a curved line coming out from the side of the dragon'southward head and extend it then it'southward about half as long as the head'south diameter. Add another curved line underneath the first one and connect the ends to make the ear.^[sixteen]
- You don't need to draw the ear on the other side of the head since you wouldn't exist able to see it from this perspective.
seven
Give your dragon a beard and mane. Chinese dragons take pilus and manes around their heads that resemble a panthera leo. Put in wavy lines that end in points around the lesser of the snout and the back of the head. Draw the hair in tufts rather than adding the individual strands so your drawing doesn't become muddled.^[17]
- The mane will go behind your dragon's horns or antlers if it has them.
- You can brand the pilus as long or brusk as you want.
8

Erase the guide lines that aren't a office of your dragon's head. Use the eraser on your pencil or a cake eraser to clean up the lines on your drawing. Erase any of the lines that y'all were using as guides, such equally the sides of the circle or parts that are overlapped past hair. Proceed getting rid of lines you don't need in your drawing anymore and blow the shavings off when y'all're done.^[eighteen]

Alert: Don't wipe the drawing with your mitt when you're washed erasing your lines since you could easily smudge the pencil.
9
Add nostrils and whiskers to the snout. Put in small-scale circles or ovals near the front of the snout for your dragon's nostrils. Leave a small gap beside the nostril earlier drawing a long wavy line that ends near the back of the dragon's head. Make some other parallel wavy line directly underneath the first one and connect the ends to add the whisker.^[19]
- Draw small smoke clouds coming out from the dragon's nostrils if y'all desire to make information technology seem like it'due south most to jiff burn.
- Shade your drawing with your pencil to make it expect more realistic and add perspective.
- Use colored pencils if y'all want your dragon to wait more colorful.
10

Finished.

Advertisement

Add New Question

Question

Why would I attempt shading the drawing rather than redoing the color?

Shading makes the art await more existent. Redoing the color makes it look more like a cartoon.
Question

What if this is difficult for me?

Jacquelyn Helmuth

Customs Answer

Effort sketching it lightly and use the motion-picture show of the dragon you want to depict. So, lightly draw what you meet and, if yous happen to get the shape you want, draw a fiddling darker. With practise, you will improve.
Question

How do you lot make epic scenes with dragons that Popular out at you?

Use dramatic shading. For instance, if your dragon is facing slightly left, add together shading under its chin, along its neck, at the left end of its eyes, and at the base of operations of its horns.
Question

How do I draw a dragon's eye?

Describe a more than rounded outline than that of a human, more like a cat's centre. Give the middle a thin, curved student. Add shading to suggest a colored iris and surround the eye with scales.
Question

What would be a good groundwork for a dragon?

Tokayyoshi

Community Answer

If it's a fire-breathing dragon, add flames! If your dragon lives in the ocean, describe fish, coral, and bubbles.
Question

How tin I make a drawn dragon appear lifelike?

Add lots of shading, i.e., depict where the lighting would show.
Question

I could not draw these without running into a trouble. Is in that location an easier mode?

It depends on your level of ability. If you want simpler processes, yous can start with easier dragons and build up from in that location.
Question

How would I draw a frill?

Frills look like smaller versions of wings that are attached to the caput. But look at wing references and size them down. If you need a better visual, tissues and pipage cleaners will help you get the positioning correct.
Question

Is there a simpler way to depict the dragon's horns?

You can make two wavy lines that connect at the meridian and grade a point, and if that doesn't work, you lot can brand a stretched triangle with some overlapping pare at the base.
Question

How practise I draw a cave for my dragon?

You can draw a cave by drawing a rocky circumvolve and adding shading in the background, darkening as you lot go deeper. Try to make the cavern walls uneven, and if you want, add some hanging rocks, rocks hugging the cavern wall, etc. Gray or brown would be good default colors, but you can add multiple colors if you desire to include glowing jewels and gems.

See more answers

Inquire a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertizing

Video

Use pictures of other animals for reference if you want to make your dragon more unique or add unique features. For example, yous can give your dragon a beak like a turtle or a

Thanks for submitting a tip for review!

Advertizement

Things You'll Need

Newspaper
Pencils
Eraser
Colored pencils (optional)

About This Article

Commodity Summary X

To draw a dragon caput using shapes, start past drawing 2 circles close together to brand the optics. So, draw 2 wedge-similar shapes for the snout, and sketch the neck using long, curvy lines, similar to the epitome of a snake. Next, use triangles and trapezoids to shape the back of the head, and describe cones and mounds to stand for parts like the horns or locks of hair. Subsequently, refine the lines and add details such equally fins and spikes. Finally, erase any unnecessary lines and color your dragon as desired. To learn more, including how to draw a dragon caput using brute references like goats and crocodiles, read on.

Did this summary aid y'all?

Thank you to all authors for creating a page that has been read 558,780 times.